QAM Output Configuration
Select the channel for the 1st QAM. The next 3 will be automatically assigned. TS01 is mapped
to QAM 1, TS02 is mapped to QAM 2 and so on.
Ensure all outputs are on and CW mode is not enabled.
RF Input Option (Stk# 6582-RFI) Configuration
Input Channel: Drop down list of channel/frequency dependent upon MAP selection.
QAM Mode: Choices are 256B and 64B
QAM Map: Choices are: STD, HRC and IRC (QAM) and 8VSB for OTA.
STEP 7 - Main > QAM Configuration
ALL MODES
PASS-THRU & MUX MODE Only
A
B
1
4
2
5
3
Once all entries have been made click the “Save” button to apply changes.
1
2
3
4
A
B
5
