STEP 8 - Configure IP Output
Perform channel scan on TV. (CATV Digital - standard).
Confirm channel output on TV. Note the that TV will display the virtual channel numbers as set by the
content provider and not those set in Step 6.
STEP 9 - Perform channel scan on TV
Open the media player (VLC or equiv.). Enter IP addresses as as assigned in Step 7 and confirm
programs are being streamed.
STEP 10 - Confirm Streaming Programs
CONTACT BT FOR MORE INFO | TECH SERVICES: 732-679-4000 x 4358
For more information and the full manual, please visit the website’s product page at:
www.blondertongue.com
The IP output programs are exactly the same as input programs. No input selection is allowed in this
model. Go to the “IP Output Config” page:
Configure the “Dest IP” and ”Dest port” for each output stream. Coordinate with the IT System
Administrator for required IP addresses.
Select the encapsulation,
“RTP” or “UDP”, based on the
receiving unit’s capabilities.
“Enable” the IP Output.
Click “Save”.
1
2
3
4
2
4
3
1
