STEP 3 - Select Inputs
STEP 4 - Verify Inputs are locked
Verify the front panel LED lights are green for each input.
2
1
3
5
6
4
Go to the “Input Map” page:
Select “Edit” at the top of the IP Input table.
Change the input selection pull-down to “All”
Select Modulation mode for all inputs. Default is “8VSB”.
For clear-QAM inputs select applicable modulation mode.
Click “Save”.
Select desired channel “Input Frequency”.
Repeat mode and input settings for all inputs.
Click “Save”.
1
2
3
4
5
6
