background image

10 AQT-RCS

Instruction Manual

The 'Reading Data from Unit' message will be displayed 

during  the  communication  process.  After  a  status 

response  is  received  the  Headend  Status  screen  will 

be  displayed.  This  is  a  real  time  data  communication 

process in which the AQT-RCS is reading the data from 

each  AQT  module  and  may  take  a  few  moments  to 

complete, please be patient.

Click 

Setup

 to proceed to the Setup Page - this permits 

the  entry  of  the  AQT-PCM  unit  digital  addresses  into 
the AQT-RCS.

The AQT-RCS 'Setup Page' is used to enter headend site information as well as the digital address of each respective PCM unit 
connected  and  deployed  in  the  headend.  The  digital  address  of  the  PCM  unit  must  be  entered  in  order  for  the  AQT-RCS  to 
communicate correctly in real time.

AQT-RCS Setup Page

Enter the desired information in the upper portion of the 'Setup Page' and click 

Save

 to apply the information to non-volatile memory. 

Use the lower portion (Headend Configuration) to enter, remove and verify AQT units. The digital address of an AQT must be first 
entered into the AQT-RCS before it can communicate. The AQT digital address can be displayed by accessing the interactive menu using 
the UP/DN arrow navigation keys on the front panel LCD menu of each PCM unit. For more detailed instructions on how to obtain the 
serial number of the AQT unit, please refer to pages 16 though 19 in the AQT-Series instruction manual.

AQT-RCS Firmware Version, 

MAC Address & Serial Number  

(shown for reference only)

Enter the desired headend 

Location and Name

Click to Add a 

PCM unit

Digital Address and Unit  

NOTE:

 It is advised to add 

units in the order they are 

physically located @ the head-

end so that they appear the 

same in the Status Page.

Click to Delete a unit

Click to verify PCM unit 

address & connection

Click to Save

Setup Changes

Click for Unit

Info Page

Click for Headend 

Status Page

Click to Refresh

and Update Page

Содержание AQT-RCS





















Отзывы: