11
NXG-EPG
User Manual
The “
Settings Configuration
” section allows the user to back-up and re-load the configuration settings.
Resets the module back to the Factory defaults. It is always recommended to save the existing
configuration file before resetting to the default values .
Downloads the current module configuration file.
Browse and select a Configuration File.
After choosing file, click this to load and apply the configuration file.
2
5
3
4
Figure 5.3 - “EPG Module” > “System” Tab
1
2
4
3
5
7
10
12
6
9
8
11
13
The “
External Ethernet Settings
” section allows the user to configure the following ethernet settings.
MAC Address:
the Media Access Control (MAC) Address is a read-only field that serves as a unique identifier assigned
to the network.
IP Address:
the static IP address that is assigned to the unit, allowing the user to access it via the web interface. Pressing
the IP reset button temporarily returns unit to factory default of 172.16.70.1.
Subnet Mask:
the subnet mask allows the user to access the unit from another network via the web interface. Factory
Default is 255.255.255.0 for local subnet.
Default Gateway:
the gateway address of unit, allowing the user to access it from another network via the web interface.
The gateway address should be in the same subnet as IP Address.
Primary DNS:
the primary Domain Name Server (DNS) hosts the controlling zone file, containing all the authoritative
information for a domain.
Secondary DNS:
the secondary Domain Name Server (DNS) contains read-only copies of the zone file, and gets its info
from a primary server in a communication known as a zone transfer.
11
6
7
8
9
10
The “
Time Settings
” section allows the user to set the following parameter:
This control allows the user to choose the time zone, shown in UTC format.
12
5.3 “EPG Module” > “System” Tab (continued)
Click to apply and save the EPG Module System configuration changes.
13
