Block V 120, Инструкция по эксплуатации

Страница: 18 / 23

FRONT PANEL CONTROLS
P17
POWER SWITCH ON REAR PANEL,
TURN IT ON BEFORE USE THE UNIT.
PUSH
OPEN
PUSH TO OPEN THIS COVER
V 120
HI FI Stereo Amplifier
Balance
L R
Volume
Treble Bass
Standby
Tone
Phono CD Tuner Aux
Input
Line In
Headphone Line In
Speaker
On
1
.
2.
3. BALANCE CONTROL KNOB
4.
5. REMOTE SENSOR
6. VOLUME CONTROL KNOB. Adjust volume level.
7
TREBLE KNOB. Adjust treble level.
BASS KNOB. Adjust bass level.
.
TONE ON/OFF SWITCH.
.LED INDICATOR, it will turn on in red color when
the unit is in standby mode.
8.
**please confirm that the impedance of the speaker must be at least
8 ohms before you select speaker output to a+b, do not select to a+b
If the impedance of the speaker less than 8ohms!!
9.
INPUT SELECTION KNOB.
10.
STANDBY BUTTON. Press this button to turn to standby
mode, press again return to normal mode
.
* If no signal input for about 3 minutes, V 120 will auto go to standby mode
to save power consumption.
11.
3.5MM jack for the source of line in.
12. HEADPHONE output jack.
SPEAKER A/B: Press this key to select speaker output to a, b, or a+b.
12