6. Putting Into Operation
6.1.1 Switching On/Off
Switch on operation switch and the control panel should illuminate and
display the current temperature within the cabinet. Simultaneously the
compressor pilot light should activate. In the event of a power failure or
interruption, the compressor will normally restart after a slight delay when
power is restored.
6.1.2 Temperature Display
During normal functioning, the cabinet temperature will be displayed on
the controller as soon as the unit is switched on.
6.1.3 Setting The Cabinet temperature
By pressing the
SET
button for 1 second, it is possible to read the set
temperature. To change the temperature press
SET
and press the switch
Λ
(Up) or
V
(Down) to respectively increase or decrease the temperature
from the preset. After selecting the desired temperature confirm this by
again pressing
SET
All the manual controls are on the right hand side of the unit. The
controls are shown in the illustration below:
1.
Defrost Light
2.
Compressor Operation Light
3.
Temperature Adjustment Keys
4.
Digital Thermostat
5.
Set Key
6.
Defrost Button
1
2
3
4
5
6
