background image

Page 8

AtmosFEAR® 221b Manual - Rev. B  

 

 

(c) 2019 Blizzard Lighting, LLC

Button

Function

<FUNCTION>
<UP>
<DOWN>
<TIMER>
<MANUAL>
<BURST>

Used to navigate the menu upward.

Value adjustment upward.
Value adjustment downward.

Start/Stop: Hold 3 seconds. Also used for downward navigation.
Switch between DMX Mode and Manual Mode.
Press and hold the button to engage manual fog burst.

4. OPERATING ADJUSTMENTS

The Control Panel

All the settings possible with the AtmosFEAR® 221b are accessed by using the con-

trol panel on the rear of the unit. There are 6 control buttons below the display which 

provide functionality and allow you to navigate through the various options.

Shown below:

 DMX Menu Home Screen - This is the top level of the DMX menu 

structure which displays the 

DMX Status

Interval

 or 

Duration

 status (0I or 0D), 

the set 

DMX Address

, and the set 

Channel Mode

 (1-3).

FUNCTION

TIMER

UP

MANUAL

DOWN

BURST

DMX  Ok         0I

Addr       8   Mode       1

To navigate the menu, use the 

<FUNCTION/TIMER>

 buttons to scroll through the 

various options. Any currently displayed option can then be altered by using the 

<UP/

DOWN>

 buttons. All value changes are saved automatically.

Button Shortcuts: 

<FUNCTION> + <TIMER>:  

Return to the main 

DMX Menu

 or 

Manual Menu

 

home screen from within either menu.

<FUNCTION> + <MANUAL>:  

Turns the fluid tank + status LEDs on/off.

Содержание atmosFEAR 221b

















Отзывы: