Page 11
AtmosFEAR® 221b Manual - Rev. B
(c) 2019 Blizzard Lighting, LLC
Custom Static Colors:
1. Use the
<FUNCTION/TIMER>
buttons to navigate to
Red Level
,
Green Level
, or
Blue Level
.
2. Then use the
<UP/DOWN>
buttons to adjust the intensity level from
0-255
(0%
<--> 100%).
3. Changes are saved automatically upon value change.
Strobe Settings:
1. Use the
<FUNCTION/TIMER>
buttons to navigate to
Strobe Level
.
2. Then use the
<UP/DOWN>
buttons to highlight
Off
, or adjust the value from
1-255
(slow to fast).
3. Changes are saved automatically upon value change.
Save and Load Settings:
You can save and load up to 3 customized manual settings. These are the only settings in
the menu that are required to be manually saved.
1. Press the
<MANUAL>
button to reach the
Manual Menu
.
2. Use the
<FUNCTION/TIMER>
buttons to navigate to
Save
or
Load Settings.
3. Then use the
<UP/DOWN>
to select any slot ranging from
Slot 1-3
.
4. P
ress & hold the
<UP>
button for 3 seconds to either save or load from slots 1-3.
Remote Control
(for use in manual mode only)
1. Plug the wireless receiver into the input on the rear of the machine.
2. Setup the remote actions for the customizable buttons 4-6.
3. You can use the wireless remote control from up to 25-meters in distance.
Remote Actions (Buttons 4-6)
1. Use
<FUNCTION/TIMER>
buttons to navigate to
Remote Action 4, 5, or 6.
2. Then use
<UP/DOWN>
to select any available action
(see page 9)
.
3. Changes are saved automatically upon selection.
4. Press the
<FUNCTION> + <TIMER>
buttons to return home.
Wireless Receiver:
Remote control with 3 customizable
buttons (numbers 4-6):
• Button 1: Start Timer
• Button 2: Stop Timer
• Button 3: Burst
• Button 4: As set in menu
• Button 5: As set in menu
• Button 6: As set in menu
