Page 3
AtmosFEAR® 221b Manual - Rev. B
(c) 2019 Blizzard Lighting, LLC
SAFETY INSTRUCTIONS
Attention:
To keep your AtmosFEAR® 221b in good working order please remember to:
•
IMPORTANT!
This machine requires a power cord of at least 14 AWG.
• Use only water-based, non-toxic fog fluid in the fluid tank.
• Keep the machine clean.
• Turn the power off before adding fog fluid.
• Turn the power off when not in use.
And also...
• ALWAYS make sure that you are connecting to the proper voltage, and that the
line voltage you are connecting to is not higher than that stated on the decal or rear
panel of the fixture.
• This product is intended for indoor use only.
• To prevent risk of fire or shock, do not expose fixture to rain or moisture.
• Make sure there are no flammable materials close to the unit while operating.
• The unit must be used in a location with adequate ventilation, at least 20in (50cm)
from adjacent surfaces. Be sure that no air intake slots are blocked.
• ALWAYS disconnect from the power source before servicing or replacing fuse and
be sure to replace with same fuse size and type.
• DO NOT operate at ambient temperatures higher than 104°F (40°C).
• In the event of a serious operating problem, stop using the unit immediately.
NEVER try to repair the unit by yourself. Repairs carried out by unskilled people
can lead to damage or malfunction. Please contact the nearest authorized technical
assistance center. Always use the same type spare parts.
• Make sure the power cord is never crimped or damaged.
• Never disconnect the power cord by pulling or tugging on the cord.
Caution!
There are no user serviceable parts inside the unit. Do not open
the housing to attempt any repairs yourself. In the unlikely event your unit
may require service, please visit our support website at: www.blizzardpro.
com/support.
Please read these instructions carefully. They include
important information about the installation, usage and
maintenance of this product.