background image

Page 12

ProPAR 7.4 Manual Rev. A  

 

 

Copyright (c) 2012 Blizzard Lighting, LLC

DMX Mode

 

Allows the unit to be controlled by any universal DMX controller. 

1.) The default mode for the fixture is DMX, which appears as

 

ADDR

 

on 

the LED Readout.  To select a different DMX address, hit the 

<ENTER> 

button and use the 

<UP/DOWN>

 buttons to select the correct address, 

then hit 

<ENTER> 

to confirm.

Auto, Master/Slave, Sound Active Modes:

Allows a single or Master/Slaved units to run factory installed programs at user 

selectable speeds.

1.) To use the fixture in 4 channel or 7 channel mode, use the 

<MENU>

 

and 

<UP/DOWN>

 buttons to select 

CHND 

and hit the 

<ENTER> 

button.

 

Then use the 

<UP/DOWN>

 buttons to select either

 4CH or 

7CH. 

Press the 

<ENTER>

 button to confirm.

2.) To set the fixture in automatic mode, use the 

<MENU>

 and 

<UP/

DOWN>

 buttons to select 

SHND, 

hit 

<ENTER>. 

Then use the 

<UP/

DOWN>

 buttons to select 

COLO

  and hit 

<ENTER>

. Then use the 

<UP/DOWN>

 buttons to select 

AUTO

 , and press 

<ENTER>

. You will 

then be prompted to select the chase speed by selecting from 

SP 1  

(slowest) to 

SP 8 

(fastest). Then hit 

<ENTER> 

to confirm.

3.) To use the fixture as either a master or slave unit, use the 

<MENU>

 

and 

<UP/DOWN>

 buttons to select 

SLND 

and then hit the 

<ENTER>

 

button. Then select either 

NAST 

for master or 

SLAU 

for slave. Press the 

<ENTER>

 button to confirm.

4.) To adjust the fade speed navigate to 

FADE,

 

hit 

<ENTER>, 

and 

select 

SP 1  

(slowest) to 

SP 8 

(fastest). Press the 

<ENTER>

 button to 

confirm. 

Sound Active Mode:

1.) To use this fixture in sound active mode, select 

SHND

, then press the 

<ENTER>

 button. Then select 

SOUN 

and hit enter.

Manual Color Adjustment:

Allows the user to adjust the color balance of the fixture. These settings are 

global, they will effect all modes.

1.) use the 

<MENU>

 and 

<UP/DOWN>

 buttons to select 

NANU 

and 

hit the 

<ENTER>

 button. 

2.) Then use the 

<UP/DOWN>

 buttons to scroll to either 

RED 

(red), 

GREE 

(green), 

BLUE 

(blue), or 

Uh1t 

(White), and press 

<ENTER>

Select the maximum level for each color between 

0-255

 (0=off), then 

hit 

<ENTER>

 to confirm.

Содержание ProPar Seven 4





















Отзывы: