Blizzard Lighting OBERON PROFILE NZ Скачать руководство пользователя страница 11

Page 11

Oberon™ Profile NZ / WZ - Rev. A    

 

© 2016 Blizzard Lighting, LLC

Control Panel Menu Structure

Address

001

Code Add

001-511

To choose a DMX address from 001-511

Master

Function

Master

Off/On

Set as master fixture 

Perform 

Function

Perform

000-002

Demo modes: 000=Off, 001=On, 002=Strobe

Channel 

Mode

Channel

1ch/2ch

Choose 1 or 2-channel DMX mode

ManDim

000

Man_Data

000-255

Dimmer intensity (0% <--> 100%)

Versions

Versions

ver 1.0

Software version

DMX Mode

Allows the unit to be controlled by any universal DMX controller. 

Setting the DMX Address: 

1.) Navigate the main menu to reach 

Address

 and press 

<ENTER>

. Then use the 

<UP/DOWN> 

buttons to highlight an address ranging from 001-511, and press the 

<ENTER>

 button to confirm your choice.

Select the DMX Channel Mode:

1.) Navigate the main menu to reach 

Channel Mode

 and press 

<ENTER>

. Then use 

the 

<UP/DOWN> 

buttons to highlight either 

1ch 

or 

2ch,

 and press the 

<ENTER>

 

button to confirm your choice.

Master/Slave Setting:

1.) Navigate the main menu to highlight 

Master Function

, and press the 

<ENTER>

 

button. Then use the 

<UP/DOWN> 

buttons to highlight either 

Master On 

or 

Master 

OFF,

 and press the 

<ENTER>

 button to confirm your choice.

Perform Function (Demo)

Allows users to set the fixture perform beam and strobe demos.

1.) Navigate the main menu to reach 

Perform Function

 and press 

<ENTER>

. Then use 

the 

<UP/DOWN> 

buttons to highlight either 

000

 (off),

 001

 (on)

,

 or 

002

 (strobe), and 

press the 

<ENTER>

 button to confirm your choice.

Manual Dimmer

Using the manual dimmer found in the LCD menu in standalone mode:

*NOTE: This fixture features DMX512 dimming priority. When the unit is 

receiving a DMX signal, the manual dimmer settings in the LCD menu are 

invalid. Manual dimming via the control panel can only be used when not 

receiving a DMX signal. 

1.) To use the manual dimmer while not using DMX control, navigate the main menu to 

reach 

ManDim

 and press 

<ENTER>

. Then use the 

<UP/DOWN> 

buttons to highlight a 

value ranging from 000-255 (0% <--> 100%), and press the 

<ENTER>

 button.

Zoom and Focus

1.) This fixture has the ability to manually zoom in/out and focus. When the lamp is 

on, loosen the zoom and focus knobs. Adjust the zoom level by sliding the zoom knob 

to your desired zoom level, then slide the focus knob to adjust the focus. Tighten both 

knobs down to secure your adjustments in place. 

2.) When your projection distance changes, you can follow the same steps as above to 

resize and focus the beam again.

Содержание OBERON PROFILE NZ

















Отзывы: