INSTALLATION OF VALVE UNIT
Cars equipped with stock solenoid valve
Actuator type
Locate the T between the turbo, actuator, and stock solenoid. Remove
and cape off the stock solenoid valve and connect the turbo and actuator
* Cut or remove stock hose between turbo compressor and actuator.
to the Blitz supplied valve unit.
Use connector to connect hose from valve unit to turbo compressor.
Use hose clamp to hold hose and connector together.
* Use hose connector to connect hose from valve unit to actuator.
Diagram 3
Use hose clamps to hold hose and connector together.
Diagram 1
DUAL PORT ACTUATOR TURBO
Cut hose between stock solenoid and dual port actuator. Cap both
ends of the hoses. Cut hose between actuator and turbo and follow
instructions on Diagram 1.
Diagram 4
Diagram 2
CAUTION
Do not T - off any of these pressure hoses.
Page 3
