USER MANUAL
EN
Reversing the door
The side at which the door opens can be changed from
the right side (as supplied) to the left side, if the
installation site
requires.
Tools you will need:
1.
8mm socket driver.
2.
Cross-shaped screwdriver.
3.
Putty knife or thin-blade screwdriver.
Before you start lay the refrigerator on it’s back in order
to gain access to the base, you should rest it on soft foam
packaging or similar material to avoid damaging the
cooling pipes at the rear of the refrigerator.
1.Remove the upper hinge core, transfer it to left side
and tighten securely, then put it in a safe place.
2.Remove the adjustable feet the bootom hing basket and
the rubber supporting pad by unscrewing the the bolts,
then fit them on by the following picture.
3.Replace the lid by filling the upper hinge core into the
upper doors hole, securing it with a two screw. Replace the
screw covers.
Warning!
When changing the side at which the door opens, the
appliance must not be connected to the mains. Remove
plug from the mains beforehand.
13
