USER MANUAL
EN
First use and installation
Cleaning before use
Before using the appliance for the first time, wash the
interior and all internal accessories with lukewarm water
and some neutral soap so as to remove the typical smell
of a brand new product, then dry thoroughly.
Important: Do not use detergents or abrasive powders,
as these will damage finish.
Important! It is necessary to have good ventilation around
the refrigerator to allow for dissipation of heat, high
efficiency, and low power consumption. For this reason,
sufficiently cleared space should be available around the
refrigerator. It is advisable for there to be 50-70 mm
separating the back of the refrigerator to the wall at least
100 mm of space on its top and a clear space in front to
allow the doors to open 180°
Appliances must not be exposed to rain. Sufficient air
must be allowed to circulate in the low rear section of
the appliance, as poor air circulation can affect
performance. Built-in appliances should be positioned
away from heat sources such as heaters and direct
sunlight.
Installation Positioning
Warning! Before installing, read the instruction
Carefully for your safety and correct operation of the
appliance.
Position the appliance away from sources of heat
such as stoves, radiators, direct sunlight etc.
Maximum performance and safety are guaranteed
by maintaining the correct indoor temperature for
the class of unit concerned, as specified on the rating
plate.
Sufficient air must be allowed to circulate in the
lower rear section of appliances, as poor air
circulation can affect performance.
100mm
100mm
50-70mm
7
