Blitz Junior Jack 0, Инструкция по эксплуатации и список запасных частей

Страница: 16 / 22

Instruction Manual for Mobile Jacks
16
6.4 Check the hydraulic fluid level.
Hydraulic fluid load lift

Retract the piston rod [1] completely.
 Disconnect the lift from the compressed air supply or the mains.
 Remove the load lifting dipstick [7] by turning it, and check the hydraulic fluid level. If required,
fill with hydraulic fluid up to the mark.

Replace the dipstick.
Hydraulic fluid level return
 Extend the piston rod [1] completely.

Disconnect the lift from the compressed air supply or the mains.

Remove the return dipstick [9] by turning it, and check the hydraulic fluid level.
If required, fill with hydraulic fluid up to the mark.
 Replace the dipstick.
6.5 Perform a safety check.
The safety check must be performed by a specialist:

Prior to initial commissioning

Periodically after initial commissioning (at the latest yearly)
 After a change in the installation location

After repair work and construction changes
The following items must be checked on the lift:
 Quick reference guide
 Name plate
 Markings on the lift

Correct installation of the carriage

Tilt protections on the lift cylinder
 Pull-out protection on the carriage
 Condition of the load pick-up devices and controls

Condition of the support structure and the welding seams

Leak-tightness of the hydraulic system
 Hydraulic fluid level

Connection cables/hoses
 Perform a function test

Enter the result into an inspection log
6.6 Changing the hydraulic fluid
The fluid change requires:

Receptacle for the hydraulic fluid

Hydraulic fluid, class HLP, viscosity ISO-VG 10, 22, or 32 (e.g. HLP 22).
 Information concerning the oil capacity. (

Specifications)
 New O-rings. (

Spare parts catalog)
Hydraulic fluid load lift

Retract the piston rod [1] completely.

Disconnect the lift from the compressed air supply or the mains.
 Remove the load lifting fluid drain plug [5] by turning it, and drain the hydraulic fluid.
 Replace the fluid drain plug with a new O-ring.
 Remove the load lifting dipstick [7] by turning it, and fill with new hydraulic fluid up to the mark.

Replace the dipstick with a new O-ring.
Hydraulic fluid return

Extend the piston rod [1] completely.

Disconnect the lift from the compressed air supply or the mains.

Remove the return fluid drain plug [8] by turning it, and drain the hydraulic fluid.
 Replace the fluid drain plug with a new O-ring.
 Remove the return dipstick [9] by turning it, and fill with new hydraulic fluid up to the mark.

Replace the dipstick with a new O-ring.