Blitz Junior Jack 0, Инструкция по эксплуатации и список запасных частей

Страница: 10 / 22

Instruction Manual for Mobile Jacks
10
 Lower the carriage into the pit and install the lift cylinder again on the carriage.
Free floor-running carriages (Junior Jack S3)
Attention: Do not position the lift horizontally for installation of the feet!
A
B
D
E
F A
B
C
 Install the carriage parts on the lift cylinder:
To do so, gently tighten 2 washers A and 2 short oiled bolts B on both sides. On the bottom, gently
tighten 3 washers A, 3 nuts C, and long oiled bolts D.

Align the carriage parts on a level surface and tighten screw connections with a tightening torque
of 40 Nm.
 Connect bracket E to hose F.
3.3 Compressed Air Supply
H
Required compressed air quality according to ISO8573-1:
 Air quality: Pressure dew point ≤5 °C
Filtration of all solid particles > 3 micron
 Connection pressure: Blitz Master Jack min. 9 bar max. 12 bar
Blitz Junior Jack min. 3 bar max. 6 bar

Air consumption for models with air motor: ca. 300 Nm³/min.