3. Versions
BLISSTOOL LTC48X is available in two versions: version 1 (
LTC48X v1
) и version 2 (
LTC48X
v2
).
On the front panel of the metal detector both versions are labeled LTC48X, but on the box with the
electronics, additionally marked is the exact version of the metal detector.
LTC48X v1 is the standard version, LTC48X v2 is a version specially adapted for heavy field
conditions.
LTC48X v1 differs from LTC48X v2 on this that
LTC48X v2 is optimized to work on
:
-
highly contaminated terrains;
-
highly mineralized terrains;
-
terrains with a high content of ore.
Of the above described terrains, LTC48X v1 also works, but LTC48X v2 is additional optimized
for such terrains.
For this purpose, compared with LTC48X v1,
LTC48X v2 contain the following
optimizations
:
[1]
Discrimination optimized for highly contaminated with iron, steel and other ancient and
contemporary pollutants terrains:
-
improved rejection of small heavily corroded iron and steel, small pieces of wire, heavily
corroded pieces of sheet metal, small iron nails and steel nails, tack, slag and other ancient
and contemporary pollutants;
-
increased range of the discrimination level set by potentiometer DISCR LEVEL.
[2]
Behavior optimized for working on highly mineralized terrains and terrains with a high
content of ore. The ground and ground-specific background of such terrains, which makes the
detector "noisy", are ignored in a better extent.
The depth of detection is theoretically better in LTC48X v1, but in practice with both versions
are achieved excellent results. It which must be borne in mind, is that in LTC48X v2 because
has increasing range of discrimination by potentiometer DISCR LEVEL, should not be set higher
than the necessary level of discrimination. Otherwise, will be losing some of the maximum
possible depth of detection! In LTC48X v1, in discrimination mode, of most terrains of practice
may safely to work at levels of 6 to 10 of potentiometer DISCR LEVEL. In LTC48X v2, in
discrimination mode, the optimum levels of potentiometer DISCR LEVEL are from level 4 to
about level 6, and potentiometer DISCR WIDTH usually not used (is set at level NORM).
Which version is right for you to judge yourself according to your specific needs.
LTC48X v1 has a maximum depth of detection, but LTC48X v2 works better of highly contaminated
terrains.
All other features are the same for both versions.
BLISSTOOL LTC48X -
User Guide (version EN201008241400)
Page 5 of 28
