Fig.1 / Metal detector BLISSTOOL LTC48 – construction
For easy assembling and
disassembling of the device, in the
standard pack:
–
the carrier rod, the fixing ring, the
electronic control module, the
handle, the armrest and the
power supply module are
combined in a single component;
–
the small fixing ring is mounted on
the intermediate connecting rod;
–
the lower connecting rod and the
search coil are assembled together
with the plastic bolt and nut.
Fig.2 / Metal detector BLISSTOOL LTC48 – components
The search coil could be repeatedly mounted and dismounted from the lower connecting
rod via the plastic bolt and nut. It is highly recommended that they should not be tightly
fastened, to ensure that first - the thread could not be damaged and second - the search
coil position could be easily changed during the search or when folded for carrying and
transporting.
The carrier rod is made from duraluminum pipe. The large fixing ring that is mounted on its
lower end is used for connecting the pipe with the intermediate connecting rod.
The electronic control module consists of a plastic box with room for the metal detector’s
electronics. The control and indication appliances lie on the front and the back panel of the
box.
The handle is part of the carrier rod and is coated with soft and solid foam.
For better stability, the armrest is made from duraluminum.
The power supply module consists of a plastic box with room for the recharging 12V/2500mAh
battery. A connector lies on the front panel of the box and is used for plugging in the battery
charger jack (the battery charger is included in the standard pack), so that the charging of the
battery could be carried out when needed.
BLISSTOOL LTC48 –
User Guide (version EN200908131904)
Page 5 of 15
