12. Practical recommendations
One of the most important components of the metal detector is the search coil, which to a
great extend determines the device’s sensitivity.
When the metal detector is carried, for example in a rucksack or a travelling bag, an
exceptional care should be taken to avoid the bending of the coil cable near the muff at the
base of the search coil. That may result in tearing the cable connecting cores and damaging of
the search coil and the metal detector.
When necessary, the search coil, the electronic control module box and the power supply
module box could be cleaned with wet cloth. Do not use detergents as they may damage the
plastic parts or the inscription on the front panel of the electronic control module.
The electronic control module and the search coil are very sensitive towards sudden
environmental temperature alterations. When there is a sudden temperature change, the user
should wait usually 25-30 minutes before switching on the metal detector.
While working with the metal detector, the search coil should be protected from damage (hit).
The usage of the metal detector in a rainy day may result in its damage.
The metal detector could be safely and properly used, if there is morning dew (because of the
watertight search coil). An extensive care should be taken, if the detector is put on the ground,
especially on a wet grass, as the water should not be allowed to get inside the electronic
control module box and the power supply module box.
The electronic control module and the power supply module are not watertight and a serious
damage would be caused to the metal detector, if water gets inside them.
If you are searching in areas, where ammunitions or other explosive substances may be
detected, be extremely careful when excavating, because we do not carry the responsibility for
your actions and behavior.
Do not open the electronic control module box and the power supply module box. If this is
necessary, please contact us, using the contact information, given in 15, so that we could
provide the appropriate technical support.
BLISSTOOL LTC48 –
User Guide (version EN200908131904)
Page 14 of 15
