Charge on.
BlinkCharging.com
Page 46 of 56
Priority mode (First Come Fist Serve)
The available current is NOT divided equally amongst all available charging stations. The first vehicle
connected would be allocated as much as possible. If any current capacity is left, then the remainder
would be given to the other charging stations.
Example A
In this example, there are three (32A) charging stations in the LLM group. Setting up each charging
stations according to the following settings:
Setting
Gateway
Client
Local Load Management
Enable
Enable
Charging Policy
First In First Serve
Not used
Group ID
LLM-Group-1
LLM-Group-1
(Same as Gateway)
Group Size
3
Not used
Max Amperage Grid
Connection
60
Not used
Fallback Current
10
10
(Same as Gateway)
Table 17. Example A – Priority Mode LLM Settings
The first vehicle connected would receive 32A.
Figure 39. Example A – One Connected Vehicle
