Via Montefeltro, 6 – 20156 Milano (MI) – Italy
- 11 -
Tel. +39 (02) 3088583 – Fax +39 (02) 33406697
www.blinkmarine.com
–
PKP-2200-SI_J1939_UM_REV1.0
18.
Address Claim at boot (74h)
This message enables or disables the address claim procedure.
Byte 0
04h
Header bytes
Byte 1
1Bh
Byte 2
74h
Address claim at boot
Byte 3
XXh
XX:
00h Disabled (default)
01h Enabled
Byte 4,7
FFh
Not used
Example:
Direction
Identifier
Format Message
Data
To Keypad
18EF2100h Ext
04 1B 74 01 FF FF FF
FF
Enable address claim
Address claiming procedure:
Under normal operation, the keypad application sends an Address Claim parameter group at start
up and waits up to 250 ms for the other devices connected to the same network to send a message
containing the device’s address and name. The keypad checks every response and compares the
names to see who has the highest priority. If a device is already using the address and has a higher
priority, then a new address is selected, and the process starts over. If the keypad has a higher
priority than the device in use then it waits for other systems to reply, while the responding device
will have to change its address and send an address claim itself. If no message is received after the
time (250ms) is up, then the device has claimed the address.
Address claim parameter group:
Priority = 6.
Destination Address should always be the Global Address FFh
Parameter Group Number (PGN) = 60928(EE00h).
Data Length = 8
Data = NAME field
Example:
Direction
Identifier
Format
Message
Data
From Keypad
18EEFF21h Ext
3F 42 6F 1A 00 82 3C
C0
