BREAKAWAY CORD CONDENSER (OPTIONAL)
Breakaway cord condenser is pre-fitted to the lift cords so that when a horizontal force is applied to
the cords entering the condenser it safely breaks away eliminating any hazardous loops.
Page 6 of 6
If the cord condenser is pulled apart:
Untangle and untwist cords.
For 2 cords:
Press the cord condenser together until it is fully closed.
For 3 cords:
Place the loose cord in the opening in one half of the cord condenser and press the cord
condenser together until it is fully closed.
For 4 cords:
Place one of the loose cords in the opening in one half of the cord condenser, the
remaining loose cord in the opening in the other half and press the cord condenser together until it is
fully closed. If there are any doubts that the cord condenser has not been re-attached correctly it can
tested by placing your arm between the cords and pressing downwards. The condenser should break
apart with minimal force, if it does not breakaway tie cords out of reach of children and contact a
reputable blind company to repair the blind.
