FITTING INSTRUCTIONS 1/3
STEP 1
The installation of this product should be conducted by someone
competent in DIY.
Outside Recess
If the blind is to be fitted outside the window ensure that
measurement C is the same. Follow instructions for FACE FIXING.
To calculate C=(A-B)/2.
Inside Recess
TOP FIX to the lintel or FACE FIX brackets to the window frame.
STEP 2
The installation height of this blind must not be less than 1500mm from the floor.
Top Fixing
Measure and mark the distance between the wall and the
back of the bracket , allowing for obstructions like handles
that protrude into the recess area. The installation bracket
(top and face fix) does not go at the ends. it will go between
the ladders, we provide 1 per ladder. Hold each bracket into
place and mark the hole positions. Fit each bracket using
suitable screws. Please ensure fixings are suitable for the
wall/surface to which you are mounting the brackets.
Face Fixing
The installation bracket (top and face fix) does not go at
the ends. It will go between the ladders, we provide 1 per
ladder. Hold each bracket into place and mark the hole
positions. Fit each bracket using suitable screws. Please
ensure fixings are suitable for the wall/surface to which you
are mounting the brackets.
Children can strangle if a safety device is not installed. Always use a safety device to keep cords and
chains out of reach of children.
You should have:
Page 2 of 6
Blind parts
Tools
