5
INSTALLATION GUIDE
2. cpu
Locate a suitable place for the CPU inside
the cars’ interior. The CPU may not be
located in the engine compartment be-
cause of heat risk and moisture. Connect
all transponders to the CPU indicated by
the numbers 1 to 4.
3. BuZZER aND LED
Locate a suitable place for the Buzzer
& LED, connect the cable to the CPU
marked “Alert”.
4. thE thREE-posItIoN sWItch
Locate a suitable place for the 3-position
mode switch, drill a hole of 20mm, draw
the cable through the hole and connect
it to the CPU.
5. coNNEctIoN to auDIo mutE
The blue wire from the CPU can be con-
nected to the Car Stereo audio mute and
will automatically mute the Car Stereo
when the Blinder alerts in multifunction
mode (See the Car-Stereo Manual).
6. coNNEctIoN to GRouND
Connect the black wire from the 3-posi-
tion switch to a solid ground (-).
7. coNNEctIoN to poWER suppLy
Connect the red wire (+) from the 3-posi-
tion mode switch to a solid switched
12-volt.
3
7
6
5
4
(Black)
Ground
(Red)
12 Volt
1
2
3
4
CPU
(Blue)
Audio Mute
A
ler
t
3-position switch
1. Parking Mode
0. Power Off
2. Multifunction Mode
USB port
(to PC)
1
2
1
