Line 3
: Selects between sequence and chord modes
Off - no sequence is being played
Seq Play - The sequencer plays and is output on the MIDI out port.
Seq Rec - The sequencer is in record mode. Playing notes records them into the
sequence. The FUNC button can be used to add rests in the sequence.
Turning the knob off of Seq Rec stores the sequence into temporary memory.
You must save it to one of the 10 sequencer / chord locations or it will be lost
when the Navigator is turned off.
Automation of the all the functions on on the main menu (OSC through LFO 3)
can be automated. Only one parameter can be changed per step. i.e. you can
change the filter cutoff on step one and the filter resonance on step two but you
can not change both the cutoff and the resonance on step one.
Chord Play - plays back the stored chords using one keypress
Chord Rec - saves chords to memory
Using an external MIDI keyboard, each key on the keyboard can store a chord.
To store a chord, first play the chord, then press the FUNC button, then press the
key on the keyboard where you would like to store the chord. When in chord play
mode, simply press that key and the chord will sound.
Line 4
: Sequence and Chord playback modes
Se Automation - When in Seq Play mode, both the notes of the sequence and
the automation will be played back.
Sequence - When in Seq play mode, only the notes of the sequence will play.
Automation - When in Seq play mode, only the sequence automation will play. This
allows for a separate modulation source without the notes of the sequence being
played.
Regular - When in Chord Play mode the chord will sound when you press the key it is
stored on.
Note - When in Chord Play mode, the notes of the chord will play individually in order
when the key pressed.
15
