10
11
information
i
information
i
Low battery
When
is displayed you must replace or
recharge (as appropriate) the battery as soon as possible.
Out of range
If this option was selected during configuration your pager
will bleep and display
RANGE?
if you are out of range of the
transmitter for more than 40 seconds.
To review and delete stored messages
The message store has a capacity of 80 characters. When
the store is full, new messages will overwrite the existing
ones, starting with the oldest.
You can set your pager (see 'User selectable functions', page
11) to review messages using either of two options:
a
Block message review. When you initiate the
message review your pager will display all the stored
messages in sequence. If you choose to delete then
all messages are cleared from the store.
b
Individual message review. This option allows you to
review and delete any stored message.
Block message review
(User selectable option)
Press the message button
to display the number of
stored messages.
To view the messages press and hold
until the last
message is displayed. Release the button. The pager will
display all the messages in sequence.
When all messages have been displayed the pager will
show:
Press the message button
momentarily if you wish to
clear all messages from the store.
Individual message review
(User selectable option)
Press the message button
to display the number of
stored messages.
Press the message button
again to display the
individual message number, starting with the oldest.
Hold the button in to scroll through the message
numbers.
Release the button when the message that you wish to
see is shown.
When the message has been shown you will be offered
the option to delete it.
Press the message button
momentarily if you wish
to delete the message.
NOTE: You must never place a pager
with a DISPOSABLE battery in a
charging rack.
Your pager will continue to display
RANGE? until it receives a valid
transmission. Other active pager
functions will be displayed
alternately.
When no messages are stored then
the displays will show:
0 M
Display backlight
When stored messages are reviewed
the display will be illuminated
automatically.
If you wish to pause the display
press and hold
The number of each message is
shown on the display.
If you do not delete the reviewed
messages the displays will show the
number of stored messages.
The default message review method
is set during pager configuration
(p13). If you select the alternative
then your pager will revert to the
default when you next switch it on.
NOTe
If you switch your pager off or place
it in a charging rack (rechargeable
batteries only) all messages will be
deleted.
The display will show:
The display will show:
The display will show:
The display will show:
NOTE
If you switch your pager off or place
it in a charging rack (rechargeable
batteries only) all messages will be
deleted.
The display will show:
