8
9
information
i
information
i
Press and hold button
until the top display shows the
pager's current Individual Code . Release the button.
Wait until the display shows
then press and
release .
The display will first show
and then the
Individual Code.
To change the Individual Code press and hold button
while it is displayed.
Send a programming call from the paging encoder
.
When the new code appears release the button.
The pager will show the Group Codes (GC) in sequence.
To add, change or delete a Group Code press and hold
while it is displayed.
Send a programming call from the paging encoder
When the new code appears release the button. The
display will change to show the next Group Code.
If you wish to add, change or delete the code press and
hold
and send a programming call.
If you do not wish to make changes do not press the
button and allow the pager to return to normal operation.
To use your pager
To receive paging calls
When your pager receives a call it will bleep and display
a message (and vibrate).
The display will show
BLEEP, SPEECH
or a message.
Press the message button
if you wish to cancel the
bleep tone whilst receiving the call.
After you have received a message call you will offered
the option to:
If you do not wish to save the message momentarily
press
If you do nothing your pager will store the message. The
message will remain on the display until you receive
another call.
To change the top display orientation when
in a charging rack
To alter the orientation of the display press button
during the first second of entry into the rack. The
selection remains in the memory.
IMPORTANT:
BEFORE PROGRAMMING YOUR
PAGER PLEASE ENSURE THAT
YOU FIT A NEW OR FULLY
CHARGED BATTERY. FAILURE TO
DO SO MIGHT RESULT IN LOST
CODES.
The display will scroll through the
user selectable options (e.g.,
display, silent, volume) before
reaching PROGRAM?
The current Individual Code will be
shown, for examlple:
The display will show
to indicate that your pager has
returned to normal operation.
BLEEP
indicates that there is no
message. The sound of the bleep
tone selected by the system operator
is normally chosen to indicate the
action that you should take.
SPEECH
(available on APG2 pagers)
indicates that a speech message is
about to be transmitted. When the
bleep tone has finished you will
receive the speech message.
