Cornical
™ - V3
© Blichmann Engineering, LLC 2020
For replacement parts, visit: blichmannengineering.com/genuine-replacement-parts
2
What’s In the Box?
1. Cone
2. Leg (installed on cone)
3. Acorn nut (installed on cone)
4. Leg cap (installed on legs)
5.
Tri-clamp butterfly valve (1.5 in)
6. QuickConnect 1/2” Straight
7. Aseptic Valve
8. Racking tube
9. Racking tube nut
10. Racking o-ring
11. Clamp – 1.5”
12. Gasket 1.5”
13. Cap – 1.5”
14. Elbow – 1.5”
15.
Barb fitting – 1.5” TC X 1” hose
16.
17.
18. QuickConnector nut
19. QuickConnector cap
20. QuickConnector ½” elbow
21. QuickConnector o-ring
22. Hose – ½” blowoff
23. Hose clamp
23. Fermentation lid hatch
23. Airlock
23. Airlock washer
23. 1” ID bottom dump
hose
BE-000547-03
BE-000939-01
BE-000028-00
BE-001022-00
BE-000865-00
aQC_12S
FE-367-01
FE-357-00
FE-376-03
BE-000682-00
BE-000633-00
BE-000868-00
BE-000630-00
BE-000863-00
BE-000627-00
QC-12NUT-01
BE-001017-00
QC-12ELBOW-01
BE-000105-00
BE-000707-00
BE-000374-00
BE-000944-01
BE-500019-00
BE-001018-00
BE-001100-00
Conical Fermentor Kit
10. Racking O-Ring
7. Aseptic Valve
19. QuickConnector™ cap
18. QuickConnector™ nut
20. QuickConnector™ ½” elbow
14. Elbow 1.5”
5.
Tri-Clamp Butterfly 1.5”
11. Clamp 1.5”
12. Gasket 1.5”
13. Cap 1.5”
24. Fermentation
Lid Hatch
Dump
Assembly
Dump
Assembly
Racking
Assembly
6. QuickConnect™ 1/2” Straight
8. Racking Tube
9. Racking Tube Nut
Fig 3
Assembly of the Keg Kit:
Note: We recommend a trial assembly of your new Cornical™ keg before using it to ferment so you are familiar with the
procedures and are sure you have all the parts. When you are ready to use the fermentor for an actual brewing session,
read the sanitizing procedures before assembling your Cornical™ since many parts are sanitized before assembly.
DANGER:
ALWAYS release the pressure inside of the keg before
attempting to open the keg or loosening the nut on the v-band clamp! If
this clamp is opened while under pressure serious injury or death may
result! Relieve pressure by pulling the ring on the top of the pressure
relief valve until the hiss of gas completely stops (Fig 4.) Remove the
hatch on top of the keg to ensure all pressure is released (Fig. 5)! At this
time it is safe to remove the v-band clamp from the bottom of the keg
(Fig. 6.)
Fig 4
