24
depending on the actual time of the motion sensor to be
activated. The delay time is 60 seconds minus the power-on
time.)
Close the camera door.
Make movements in front of the camera at several positions
within the area where you expect the game or subjects to be.
Try different distances and angles from the camera.
If the motion indicator RED light blinks, it indicates that
position can be sensed. If it does not blink, that position is
outside of the sensing area.
In these sensing tests, the camera will take pictures once
motion is captured. When you open the camera, the screen
shows the number of times triggered, you can review the
pictures on the screen.
(Note: The red light will blink only
when the motion is within the sensing area of the central
PIR sensor. The central sensor's sensing angle of view is
60°. Each of the side sensors has a 30° angle of view, which
is only used to pre-activate the camera and accelerate the
triggering speed, there is no RED light blinking whatever
each of the side sensors detects motions.)
The results of your testing will help you find the best
placement when mounting and aiming the camera
.
The height
above from the ground for placement of the device should vary
with the size of animal you are hoping to see. In general, 3 to 6
feet is preferred.
You can avoid potential false triggers due to temperature and
motion disturbances in front of the camera by not aiming it at a
heat source or nearby tree branches or bush (especially on
windy days).
Do NOT install the camera behind the glass window as that is
not possible to sense any motion. Avoid aiming the camera
