23
10ft. (3m) from the camera.
There are two ways to mount the camera: using the provided
adjustable web belt, or the tripod socket.
Using the adjustable strap
: In order to use the strap on the
camera
,
push one end of the strap through the two brackets on
the back of the camera
.
Thread the end of the strap through the
buckle. Fasten the strap securely around the tree trunk by
pulling the end of the strap firmly so there is no slack left
(
Figure 12
).
Using the tripod socket
: The camera is equipped with a socket
at the bottom end to enable mounting on a tripod or other
mounting accessories with a standard
UNC 1/4-20
thread screw
(user supplied)
.
Figure 12: Mounting the Camera
9.2. Sensing Angle and Distance Test
In order to test whether the camera can effectively monitor the
area you choose, this test is recommended to check the sensing
angle and monitoring distance of the camera
.
To perform the
test:
Switch the camera to the
ON
mode.
Press
MENU
button, go to “Motion Test”. The camera will
count down a max 60-second delay and be ready to capture
motion.
(Note: The delay time may be less than 60 seconds,
