17
Press the
UP/DOWN
key to move the marker, Press the
LEFT/RIGHT
key to change the setting, and press the
OK
key to confirm the change. Always remember to press the
OK
to save the change. Otherwise, you will lose your new setting.
Also you can program your camera in the App.
Note:
All camera settings programmed through the App will
not take effect until the next “Cellular Transfer” cycle. After
the setting takes effect, the orange bar on the left of the
modified settings will disappear
.
Considering cellular
network transmission speed and power saving, the App will
limit photo quality and size, video quality and length.
Parameter
Settings
(
Bold
=
default)
Description
Cellular
On
Off
Selecting On to enable cellular, you can
use the App to connect the cellular
network. Selecting Off to disable cellular,
the camera will operate in stand-alone
mode and save battery power.
APN
Only can be programmed in the camera.
Reserved for future use. Please don’t
change it.
Activation
Code
It is used for activating the camera. Scan it
in the App during the setup.
Cellular
Info
Details of cellular modem and network,
such as Adapter, IMEI, Configure, Status,
Signal, SIM, Network, Name, PIN,
ICCID, IMSI, APN, PDP etc.
Cellular
Transfer
Transfer
on Each
Capture:
Selecting
On
, the cellular network will
send picture to phone after each capture
by the camera.
IMPORTANT Note:
