Blaze BLZ-SB2LTE Скачать руководство пользователя страница 29

Страница: 29 / 36

Version 1.0

BLAZE Instructional Book

Page | 29

The appliance must be completely cooled before proceeding. Make sure the gas supply is off and all control

knobs are in the “OFF” position. You must remove all cooking grate to expose the main burners in the appliance.

Keep all burner ports free of obstructions with a small metal object. Clean out any debris inside the burner head

and inspect the burner inlet to ensure it is free of any obstructions. Use a rod or pipe cleaner to remove any debris

within the burner if necessary.

SPIDER

AND

INSECT

WARNING

Spiders and other insects can nest in the burner of this and any other Power Burner, which causes the gas

to flow from the front of the burner. This dangerous “condition” can cause a fire behind the valve panel,

damaging the Power Burner and making the Power Burner unsafe to operate. Inspect the burners before

each use. Symptoms of insect nests can include any of the following conditions:

1) The smell of gas in conjunction with the burner flames appearing yellow.
2) The Power Burner does not reach temperature.
3) The Power Burner heats unevenly.
4) The burner makes popping noises.

Fuel Conversion

CAUTION:

This should only by performed by a licensed gas professional.

Gas Regulator :

Currently all Natural Gas burners are supplied with a regulator which is appropriate for use with Natural

Gas or low pressure Propane.

1. When converting to Propane Gas, the most common Propane canister used is a smaller sized

portable canister (typically 5 gallons or 20 pounds).The pre-installed regulator will need to be

converted to LP gas (see below) and add a secondary low pressure hose and regulator with an

outbound pressure set to approximately 11

”

of water column pressure. If an individual is intending

on using Propane provided from a larger tank permanently installed on location, the regulator

included with the appliance will only need to be converted for use with LP fuel (see NG-LP

Regulator Conversion below). Please be aware that this included regulator can only withstand

an inbound pressure of .5 PSI or roughly 14 inches of water column pressure. Any higher

pressure on location will have to be further regulated before connecting to the regulator on the

appliance. Please consult your local Propane gas provider to confirm the gas pressure on the supply

line feeding the appliance.

Содержание BLZ-SB2LTE





































Результаты поиска

Содержание BLZ-SB2LTE

Отзывы:

Бренды по названию

Популярные бренды

Blaze BLZ-SB2LTE, Инструкция по использованию и уходу

Результаты поиска

Содержание BLZ-SB2LTE

Отзывы:

Бренды по названию

Популярные бренды