![Blaze BLZ-SB2LTE Скачать руководство пользователя страница 23](http://html.mh-extra.com/html/blaze/blz-sb2lte/blz-sb2lte_use-and-care-manual_2772190023.webp)
Version 1.0
BLAZE Instructional Book
Page | 23
ALL GAS CONNECTION POINTS SHOULD BE TESTED FOR LEAKS AFTER INSTALLATION
PRIOR TO FIRST USE OF THE GAS APPLIANCE(S).
Before installing an appliance in any island cut out, make sure that the opening is not bigger than the outside frame
of the appliance unit. The appliance should rest on the lip of the frame.
Pay careful attention to the location of the gas line. It should be routed away from sources of heat, sharp edges, and
aggressive surfaces and should make as few bends as possible.
Ensure the gas line connection will be accessible when appliance is installed. A safety shutoff valve is required at
this gas connection point.
The main burners must be double checked for the correct placement in the appliance before operation. When
finished ensure that the burners are aligned in the bracket slot. Failure to do so could result in a fire and injury.
If the outdoor kitchen countertop will overhang the face of the island, notching out the two front countertop edges will
be necessary to allow the double burner to slide flush against the outer front wall to the outdoor kitchen. (This is not
necessary for the drop in single burner.) Due to differing personal preferences of the size of the notch out, this is
recommended to be done at the point of installation so that the consumer can dictate their preference.