Blaze Outdoor Products Instructional Book
Page |
33
Version 1.0
P a g e
|
13
TO
LIGHT
THE
POWER
BURNER’S
BURNER
Lighting
the
Power
Burner
1. Open the gas supply shut-off valve.
2. Push in the knob and turn to the left until you hear gas escaping. Wait a few seconds and
then complete the turn where you will hear the click of the flame thrower ignition system to ignite
the burner. If the igniter does not light turn to the right and OFF position, verify that the gas is on
and then try again.
3. Once you see or hear a flame you can adjust the burner to the desired position.
CAUTION
: If ignition does not take place within a few clicks, turn knob to the OFF Position, wait
for five minutes and repeat step 2.
Match/BBQ
Lighter -
Lighting
Instructions:
The burners can be lit manually using a lighted long match or long BBQ lighter.
1. Insert a long lit match or BBQ lighter thru the grates and near the top of the burner. Be sure
to keep a safe distance from the burner.
2. Push and turn the knob counter-clock-wise past the “CLICK” position. Once you see or hear a
flame you can release the knob.
Important
: If burner fails to light within 5 seconds, turn off gas and
wait 5 minutes before
repeating the process.
NOTE: if the burner does not ignite for the first time use – there may be “AIR” in the line.
Contact your Gas Professional to bleed out the line.
Warning
:
If you smell gas, shutoff the gas supplies and immediately
checks for leaks
using the soapy water technique described in this manual.
