Blaze King TORINO, Руководство по установке, эксплуатации и обслуживанию для пользователей

Страница: 41 / 48

The torino
Page 41
ALLOWABLE TERMINATION LOCATIONS
Canadian Installations
1
US Installations
2
____________________________________________________________________________________________________
A= Clearance above grade, veranda
*(min. 12”/30 cm) *(min. 12”/30 cm)
porch, deck or balcony
____________________________________________________________________________________________________
B= Clearance to window or door
*(min. 12”/30 cm) *(min. 12”/30 cm)
that may be opened
____________________________________________________________________________________________________
C= Clearance to permanently closed
*(min. 12”/30 cm) *(min. 12”/30 cm)
window
____________________________________________________________________________________________________
D= Vertical clearance to ventilated
*min. 25-1/2” (65 cm) *min. 25-1/2” (65 cm)
soffit located above the terminal check with local check with local
from the centerline of the terminal code code
________________________________________________________________________________
E= Clearance to unventilated soffit *min. 25-1/2” (65 cm) *min. 25-1/2” (65 cm)
from the centerline of the terminal.
____________________________________________________________________________________________________
F=Clearance to outside corner
*min. 10”/25cm *min. 10”/25cm
from the centerline of the terminal.
____________________________________________________________________________________________________
G=Clearance to inside corner
*min. 16”/40cm *min. 16”/40cm
the centerline of the terminal.
____________________________________________________________________________________________________
H= Clearance to each side of centerline
3’ (91cm) within a height 15’ (4.5m) *
extended above meter/regulator assembly above the meter/regulator assembly
____________________________________________________________________________________________________
I= Clearance to service regulator vent outlet
3’ (91cm) *
____________________________________________________________________________________________________
J= Clearance to no mechanical air supply inlet
12” (30cm) 9” (23cm)
to building or the combustion air inlet to any
other appliance
____________________________________________________________________________________________________
K= Clearance to a mechanical air supply inlet
6’ (1.83 m) 3’ (91 cm) above if within 10’ (3 m)
horizontally
____________________________________________________________________________________________________
L= Clearance above paved sidewalk or paved
7’ (2.13 m)† *
driveway located on public property
____________________________________________________________________________________________________
M = Clearance under veranda, porch, deck or
12” (30 cm)‡ *
balcony
____________________________________________________________________________________________________
1
In accordance with the current CSA B149.1, Natural Gas and Propane Installation Code
2
In accordance with the current ANSI Z223.1/NFPA 54, National Fuel Gas Code
† A vent shall not terminate directly above a sidewalk or paved driveway that is located between two single family dwellings
and serves both dwellings.
‡ Permitted only if veranda, porch, deck or balcony is fully open on a minimum of two sides beneath the floor.
* For clearances not specified in
ANSI Z223.1/NFPA 54 or CSA B149.1 , one of the following shall be indicated:
a) A minimum clearance value determined by testing in accordance with section 2.23.7, or ;
b) A reference to the following footnote: “Clearance in accordance with local installation codes and the requirements of the gas