Blaze King Torino II Insert 1607, Руководство по эксплуатации и установке

Страница: 25 / 41

G:\InDATA\manuals\OM-1607 E V1.02 November 19, 2012
Page 25
TORINO II Insert1607
MAINTENANCE
CAUTION:
Do not conduct maintenance on the appliance while it is operating or while it is
still hot. Make sure switch on the Battery pack / Receiver is in OFF position.
Turning the electric supply off will not prevent unexpected ignition !!
CLEANING THE APPLIANCE
The exterior surfaces and glass may be cleaned with a , non-abrasive cloth and water or a suitable, mild, non-
abrasive cleaner.
Regularly,
• Clean and remove any lint accumulations or debris from the grills and in any combustion and convection
air passage ways.
• Keep the appliance area free from combustible materials, such as paper, wood, clothing, gasoline and
flammable solids, liquids and vapors.
• Check for unusual noise, odor and operation of the appliance.
• Check the vent terminal for any damage, or obstruction by plants or debris accumulation.
• Visually check the height and color of the burner and pilot flames.
Once a Year have a qualified service technician,
• Completely inspect the appliance and the venting system.
• Clean and remove any lint accumulations or debris in the firebox, on the burners, on the pilot, at the
primary air opening, on the convection air blower and in any combustion and convection air passage
ways, see ”FAN REMOVAL AND INSTALLATION” on page 32
• Check the safety system of the gas valve.
WARNING :
All parts removed or disturbed must be properly replaced after maintenance.
Service and repair must be conducted by a qualified service person. If these
instructions are not followed, a fire or explosion may result, causing property
damage, personal injury or loss of life.
VERIFY PROPER OPERATION AFTER SERVICING
PLATING
• The plating requires little maintenance and needs only to be cleaned with a soft damp cloth. Do not use any
abrasive cleaning materials.
• Avoid fingerprints on gold. Wipe off fingerprints before firing.
DOOR
• Check the gasket to see that it is still forming a seal. Replace gasket if there is any sign of wear.
VIEWING GLASS REPLACEMENT:
• This appliance is supplied with high temperature 5mm high temperature ceramic glass that will easily
withstand the heat your unit was designed to produce. In the event the glass breaks, contact your dealer or
BLAZE KING to arrange for your glass to be replaced / repaired.