Blaze King Torino II Insert 1607, Руководство по эксплуатации и установке

Страница: 20 / 41

G:\InDATA\manuals\OM-1607 E V1.02 November 19, 2012
Page 20
TORINO II Insert 1607
THERMOSTAT REMOTE CONTROL
OPERATING PROCEDURE
Initializing the System for the first time
Install the 4 AA batteries into the receiver battery bay. Note the polarity of battery and insert into the battery bay
as indicated on the Battery cover (+/-). Place the 3 position slider switch in the “Remote” position
(Fig. 3). Using the end of a paper clip, or other similar object, insert the end of the paper clip into the hole
marked “PRG” on the Receiver front cover (Fig. 3). The Receiver will “beep” three (3) times to indicate that it is
ready to synchronize with a Transmitter. Install the 3 AAA type batteries in the Transmitter battery bay, located
on the base of the Transmitter. With the batteries already installed in the Transmitter, push the On button. The
Receiver will “beep” four times to indicate the Transmitter’s command is accepted and sets to the particular code
of that Transmitter. The system is now initialized.
Temperature Indication Display
With the system in the “OFF” position, press the
Thermostat Key and the Mode Key at the same
time. Look at the LCD screen on the Transmitter to
verify that a C or F is visible to the right of the Room
Temperature display. (Fig. 6)
Fig. 6: Remote Control display in Fahrenheit and Celsius.
Fig. 7: Remote Control display.
Fig. 3: Receiver body
Turn on the Appliance
Press the ON/OFF Key on the Transmitter. The Transmitter display will show all active Icons on the screen. At
the same time the Receiver connects the thermopile to the gas valve millivolt coil and the appliance main burner
turns on. A single “beep” from the Receiver will confirm reception of the command.
Turn off the Appliance
Press the ON/OFF Key on the Transmitter. The Transmitter LCD display will only show the room temperature
and Icon (Fig. 7). At the same time the Receiver disconnects the thermopile from the gas valve millivolt coil and
the appliance burner turns off. A single “beep” from the Receiver confirms reception of the command.