PI-1010A
Page 24
DATE PRINTED: 4/7/11
Version 1.05
A Couple of Tips:
Having your next intended load of wood ready when you open the Front Loading door will decrease the amount of time
that the Front Loading Door is open. This not only give you a margin of safety but also allows the Combustor to remain
hot. Always open the Front Loading Door SLOWLY. This will reduce the incidence of back puffing which can cause
smoke from the fire box to “spill” into your room.
Always put the by-pass handle in the open (upright) position before you open the Front Loading Door. This will decrease
the chances of “spilling” smoke into the room when you are adding wood.
REMEMBER TO CLOSE THE BY
PASSPASS HANDLE
(downward) as soon as you have loaded your wood.
DO NOT OVER FIRE! Although your fireplace insert has been designed to heat efficiently and operate at high
temperatures it is meant to supplement other heating means in your home. Your stove should never be fired to a red hot
condition.
Congratulations...You now have the greatest, most efficient burning wood stove in full operation. You can now adjust the
Thermostat to fit your needs. Keep in mind that you will not see a lot of flames from this point on. If you burn the stove on
a very low setting for extended periods of time, you may begin to see creosote deposits forming on the glass door. To
remove these deposits, simple run the stove on “High” for a short time. The “High” setting will burn off most of the
deposits.
Thank you again for purchasing a Blaze King catalytic wood stove. We hope you enjoy the money and time you save.
PLEASE BE CERTAIN TO READ THIS OWNERS & OPERATORS MANUAL THOROUGHLY.
Operation
