PAGE 7
OM-9603
Date Printed: February 15, 2008
Version: 1.02
One of the byproducts of the combustion process in a gas appliance is a mineral which can show up as
a white film on the ceramic glass of the viewing door. The composition of the deposit varies widely from
location to location and also from time to time in the same locations. You may have the problem for a
time and then not see it for many months when it will reappear in your area. It seems this is associated
with the varying sulfur content of the gas. We have discussed this problem with ceramic glass
manufacturers and they cannot give us a definitive answer to this problem. We have input from several
dealers who have tried different cleaning products with varying results. We can only make the following
recommendations but we cannot guarantee results in very case.
WARNING!!
Never clean the ceramic glass or any other part of the appliance while it is still hot. Please
shut off your appliance and wait for it to cool down prior to cleaning.
1) Clean the glass regularly as soon as you notice the buildup (white film). If the film is left for a long
period of time it will build up and bake on making it hard or almost impossible to remove
2) NEVER use an abrasive cleaner on the ceramic glass. Any abrasion of the surface will immediately
affect the strength of the glass. An emulsion type cleaner is best.
3) Use a soft, damp, preferably cotton, cloth to apply the cleaner and a soft, dry cloth to dry the glass.
Most paper towels and synthetic materials are abrasive to ceramic glass and should be avoided.
WHITE OFF by Rutland has been tested and shown to be effective in removing ugly mineral deposits
from ceramic glass.
NOTE: This is a problem beyond BLAZE KING'S control and is not covered under warranty.
Legal Rights of Purchaser:
This warranty gives you specific legal rights and you may have other rights that vary from state to state (or
province to province).
Blaze King Assurance Plan:
Included with each gas stove manufactured by Blaze King is a Warranty Card, which must be completed in its
entirety and returned to Blaze king within ten days from the date of purchase. Blaze King will be unable to
properly administer the warranty if the card is not completed and registered on file.
The Protection Plan will pay to repair and or replace parts which fail under normal usage at labor rates
established by this Agreement. Extra charges such as mileage, overtime or shipping are not covered. Nuisance
calls are not covered by the Plan.
This Plan is for residential stoves and does not apply to commercial
applications. Only repairs attributed to normal failure of the electronic and mechanical functions of the stove are
covered. Failure due but not limited to, abuse, negligence, impact, fire, lightning, power failures and or surges,
rust and corrosion are not covered. Damage and or repairs to cabinets and all exterior components, remote
controls, and normal maintenance , related duct work, power surges, electrical spikes or electrical circuit
overloads, filters, knobs, glass, gaskets, block and tile etc., are not covered. Additional or unusual utility bills
incurred due to any malfunction or defect in equipment listed on the Plan, labor cost of gaining access to or
removal of a unit that requires special equipment or tools such as cranes, ladder trucks, etc., are not covered.
These include but are not limited to, cleaning, adjustments of the customer controls and customer product
education. Labor, materials, expenses or equipment required to comply with the law and or regulations set forth
by any governmental agencies are not covered by this Plan.
BLAZE KING WARRANTY
WHITE MINERAL DEPOSITS
DOOR SEAL GASKET
The front door of your new Blaze King direct vent is gasketed and has been adjusted for a tight seal. As with all
direct vent appliances, a tight seal is necessary for maximum performance and proper venting of combustion
products. With usage the door gasket material may compress. The door may require periodic adjustment to
maintain a proper seal. The time to make this adjustment will vary depending upon individual hours of use, btu
settings, and frequency of opening and closing the door. Check the door on your appliance periodically, espe-
cially during the first 90 days of operation, to ensure it is sealing properly. Your Blaze King dealer/installer
should be contacted to properly adjust the door if required.
