4
Make sure the vacuum cleaner's dust chamber is empty, and the filters are correctly fitted. Attach the
crevice nozzle.
AFTER VACUUMING
BEFORE STARTING THE VACCUUM CLEANER
EMPTYING THE DUST CONTAINER
Charge up the vacuum cleaner's battery. Connect the power cord's plug into the power socket on the
vacuum cleaner, and plug the adapter into an electrical outlet, or plug the adapter into the charging
base and leave the vacuum cleaner in the base. Charging takes up to 3 hours.
To switch on the vacuum cleaner, press the on/off switch. To adjust the suction power, press the switch
again. A fully charged battery provides approximately 10 minutes of operation with maximum suction
power, or 20 minutes with less suction power.
Remove the nozzle. Clean the accessories. Empty the container and clean the filters.
The container can be emptied quickly by opening the flap.
To remove the container, rotate the container gently and remove it.
To replace the container, follow the steps above in reverse order.
CLEANING AND MAINTENANCE
To empty the container and clean the filters, remove the container.
It is recommended to change the HEPA filter every 3 months, depending on how heavy the use.
Change the filters according to the instructions provided in the section on emptying the dust
container.
Remove the filters installed in the container. Empty the container of the dust. Clean the filters.
Regularly clean the suction nozzles and container, of dust.
The cleaner's body should be wiped with a slightly damp cloth, and then immediately wiped dry.
Clean the filters each time you empty the dust container. It is recommended to clean the filters
thoroughly under running water. After washing the filters, refit them only when they are completely
dry.
VCP501
5.Power socket
a)Crevice nozzle with pull-out brush
2.Charging station
3.Power cable with adapter
1.Suction nozzles
4.Handle
6.Charging contacts
8.LED indicator
c)HEPA filter
b)steel pre-filter
7.On/off switch
9.Dust container
a)container
d)flap for quick tank emptying
