32
Switching on by inserting a CD
If there is no CD in the CD compart-
ment when the car radio is switched off,
➮
press the
button
9
.
This flip/release panel then opens.
➮
Without exerting any force, slide
the CD into the compartment, print-
ed side uppermost, until you feel
some resistance.
The CD is automatically drawn into the
drive.
Do not hinder or assist the drive as it
draws the CD in.
➮
Press the flip/release panel gently
until you feel it slot into place.
The car radio switches itself on and CD
playback begins.
Switching on/off
There are various ways of switching the
car radio on and off, as described be-
low.
Switching on/off using the ignition
If the car radio is correctly connected to
the ignition and has not been switched
off using the button
3
, it is switched
on/off simultaneously with the ignition.
You can also switch on your car radio
when the vehicle ignition is off.
➮
To do so, press the button
3
.
Note:
●
To protect the vehicle battery, the
unit switches off automatically after
one hour.
Switching on/off using the flip/
release panel
➮
Remove the flip/release panel.
The unit switches itself off.
➮
Replace the flip/release panel once
more.
The car radio is switched on. The last
settings (radio, CD, CD changer or AUX)
are activated.
Switching on/off using the button
3
➮
To switch the unit on, press the but-
ton
3
.
➮
To switch the unit off, hold the but-
ton
3
down for more than two
seconds.
The car radio is now switched off.
SWITCHING ON/OFF
