50
Changing the display contents
You can choose between different display
modes during cassette operation:
●
Display of the elapsed play time
(“ELAPSED”).
●
Display of the remaining play time
(“REMAIN”).
●
Display of the tape counter
(“COUNTER”).
●
Display of the time (“CLOCK”).
➮
To change between the various display
modes, press the DIS button,
:
, as of-
ten as necessary for the desired infor-
mation to appear on the display.
Resetting the counter
To reset the counter,
➮
hold down the DIS button,
:
, for longer
than two seconds.
Fast winding
Fast forward
➮
Press the button,
7
.
“FORWARD” appears in the display.
Fast rewind
➮
Press the button,
7
.
“REWIND” appears in the display.
Stopping the tape
➮
Press the OK button,
5
, or the tape
run button,
7
, on the other side.
Play continues.
Note:
While the tape is being fast wound, it is pos-
sible to hear the radio station that was most
recently tuned in. This requires the “Radio
monitor” function to be switched on.
Switching the radio monitor on
and off
➮
Press the softkey,
4
, indicating “RM”.
When the radio monitor is switched on, “RM”
is displayed with light and shade reversed.
The current state, i.e. “RM ON” or “RM OFF”,
is shown briefly on the display when switch-
ing.
Skipping blank tape
It is possible automatically to skip sections of
blank tape that are more than ten seconds
long. This requires the blank skip function to
be activated.
Switching blank skip on and off
➮
Press the softkey,
4
, indicating “BLS”.
When the blank skipping is switched on, “BLS”
is displayed with light and shade reversed.
The current state, i.e. “BLS ON” or “BLS OFF”,
is shown briefly on the display when switch-
ing.
CASSETTE OPERATION
