Blaupunkt Kingston MP47, Инструкции по эксплуатации и монтажу

Страница: 30 / 216

30
Adjusting equalizer treble
(E-TREBLE)
You can select 1 of 4 treble frequencies
(10 kHz, 12.5 kHz, 15 kHz, 17.5 kHz).
Note:
For further information on setting the
treble level, please read the section
entitled "Adjusting TREBLE" in this
chapter.
Adjusting the treble frequency
Press the AUDIO button
7
.
"BASS" appears on the display.
Press the or button
<
repeat-
edly until "ENHANCED" appears on
the display.
Press the MENU/OK button
;
.
"E-BASS" appears on the display.
Press the or button
<
repeat-
edly until "E-TREBLE" appears on the
display.
Press the button
9
to open the
E-Treble menu.
"FREQ" and the current setting appear on
the display.
Set the treble frequency with the or
button
9
.
When you have fi nished making your chang-
es,
press the ESC/DIS button
5
.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Preamplifi er output
(Preamp-Out/Sub-Out)
You can use the preamplifi er outputs
(Preamp-Out) of the car sound system to
connect external amplifi ers. In addition,
you can connect an amplifi er for operating
a subwoofer to the integrated dynamic low-
pass fi lter of the device (level and cut-off
frequency can be adjusted).
For this purpose, the amplifi ers must be
connected as described in the installation
instructions.
Adjusting Sub-Out level and
Sub-Out cut-off frequency
The sub-out level can be adjusted in 8 in-
crements (0 to +7). You can also select 1 of
4 cut-off frequencies: 0 Hz, 80 Hz, 120 Hz
and 160 Hz.
Press the AUDIO button
7
.
"BASS" appears on the display.
Press the or button
<
repeat-
edly until "ENHANCED" appears on the
display.
Press the MENU/OK button
;
.
"E-BASS" appears on the display.
Press the or button
<
repeat-
edly until "SUB-OUT" appears on the
display.
Press the button
9
to open the Sub-
Out menu.
"GAIN" and the current setting appear on
the display.
쏅
쏅
쏅
쏅
쏅
Sound Preamplifi er output
01_KingstonMP47_NRDS_eng.indd 30 01_KingstonMP47_NRDS_eng.indd 30 2/8/07 7:05:48 PM 2/8/07 7:05:48 PM