54
DVD SETUP – BASIC SETTINGS
Setting the picture mode
You can select the picture mode for op-
timum picture quality. Select the “AUTO”
option.
You can adjust the picture mode set-
ting in the “PIC MODE” menu item in
the “GENERAL SETUP” menu.
Displaying the camera angle
You can set the system to display a “
”
camera symbol whenever there is more
than one camera angle available on the
DVD. To do so, select the “ON” setting.
You can adjust the camera angle set-
ting in the “ANGLE MARK” menu item
in the “GENERAL SETUP” menu.
Switching the coaxial digital
output (SPDIF) on/off
If you connect the ME4 to an amplifier
using the digital (SPDIF) input, you must
activate the SPDIF output on the ME4.
To do so, select the “ON” setting.
You can adjust the digital output setting
in the “SPDIF OUTPUT” menu item in
the “AUDIO SETUP” menu.
Configuring the audio output
If the device is installed in the vehicle,
you should connect it to the vehicle’s
system (amplifier, monitor) via the line
output. Alternatively, you can also con-
nect headphones to the infrared receiv-
er input (left-hand side of the device,
REMOTE SENSOR).
If you want to use headphones, select
the “RF REMOD” setting under “OP
MODE” in “AUDIO SETUP”.
Note:
Generally, the line output should be
used (“LINE OUT”).
“Dual mono” setting
For DVDs with 1+1 audio mode (two
mono channels), you can set how you
want the two channels to be outputted.
The following settings are available:
●
Stereo:
Stereo playback of a 1+1 pro-
gramme. Channel 1 is sent to the
left output and channel 2 to the
right output.
●
CH1-Mono:
Channel 1 of the DVD is played on
both outputs (left and right).
●
CH2-Mono:
Channel 2 of the DVD is played on
both outputs (left and right).
●
Mix Mono:
Channel 1 and 2 of the DVD are
played on both outputs (left and
right).
➮
Open the setup menu.
➮
Use the
=
buttons to select
the “AUDIO SETUP” menu item.
➮
Confirm your choice by pressing
the ENTER/PLAY button
C
.
➮
Use the
=
buttons to select
the “DUAL MONO” menu item.
➮
Press the button
=
.
➮
Use the
buttons
=
to select
the setting that you want.
➮
Confirm your choice by pressing
the ENTER/PLAY button
C
.
02DVD_ME4_gb.pdm
18.08.2005, 11:40 Uhr
54
