34
Setting the balance (left/right) and
the fader (front/rear).
Press AUD twice:
Fader front
Fader rear
Balance left
Balance right
The settings selected will appear in the
display. The last setting will be stored
automatically.
Switching AUD off: Press the button
once again.
If no changes are made within 8 sec-
onds, the display will switch back to
the previous condition.
Extra function AUD
Loudness - When listening at a low
level, the Loudness function creates a
more natural sound by boosting
the low frequency range.
Loudness on/off: Press AUD for ap-
proximately 1 sec.
“LD” lights up in the display if the
Loudness function is switched on.
Please refer to chapter “DSC program-
ming” for more information on how to
program the Loudness boost.
Important notes
Precautions
Before starting to use your new car radio,
please read the following information care-
fully.
Traffic safety
Traffic safety always has the highest priori-
ty.
As the driver of a motor vehicle, it is your
responsibility to pay attention to the traffic
situation at all times. Never use your car
radio in a way that could distract you.
Please keep in mind that you travel a dis-
tance of 14 m per second at a speed of only
50 km/h.
Should the traffic situation become particu-
larly demanding, we advise you not to use
the radio.
Always make sure that you are still able to
hear any warning signals coming from out-
side of the vehicle, such as police or fire
engine sirens, so that you can react accord-
ingly.
Therefore, you should always select a mod-
erate volume for playing your car radio while
you are driving.
Installation
If you would like to install your new car ster-
eo yourself or add other audio components
to existing ones, then please read carefully
the enclosed instructions on installation and
connection.
In order to ensure that the set operates prop-
erly it is necessary that the positive power
supply line is connected to the ignition and
the per12 V lead.
Do not ground the loudspeaker outputs!
Sound source mute
If there is a mobile telephone installed in your
vehicle, the radio, tape player or CD player
can be muted automatically when the phone
is being used.
“PHONE” will then appear in the display.
When TA is active, traffic messages will al-
ways have priority. The announcement will
be aborted by pressing the TA button.
HH/Melb/Miami gb®
15.05.2002, 13:46 Uhr
34
