43
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
PTY priority
Situation:
PTY is switched on and lights up in the dis-
play.
No station offering the selected programme
type can be currently received (neither with
seek tuning nor with scan).
The set will switch back to the previous sta-
tion.
As soon as a programme with such PTY can
be received within the broadcasting network,
the unit will switch over to the correspond-
ing station for the duration of the pro-
gramme.
Example: German broadcasting network
NDR:
-
Station tuned in: NDR3.
-
“PTY” lights up in the display.
-
Programme type “POP” selected.
-
Seek tuning is started.
-
No station with “PTY-POP” can be
found.
-
The display shows “NO PTY” and
-
automatically switches back to NDR3.
-
NDR2 airs a “PTY-POP” programme.
-
The system will switch to the linked
NDR2 station for the duration of the
“POP” programme.
Storing programme types
At the factory, one programme type was
assigned to each of the preset buttons 1-6.
If desired, you can also store other availa-
ble programme types.
To do so, make sure that “PTY” lights up in
the display.
•
If necessary, press the PTY button to
switch on the function.
•
Select a programme type using but-
tons << >> and
•
hold down the desired preset button
(1-6) until you hear a beep.
Now the selected programme type can be
recalled by pressing this preset. For this, the
PTY function must be active.
Scanning stations with PTY-SCAN
Condition: “PTY” must appear in the display.
•
Press the SC button.
All of the received stations offering the se-
lected programme type will be scanned.
To switch off PTY-SCAN:
•
Press SC once again.
During cassette or CD-changer operation,
the set will also automatically switch to the
programme offering the selected PTY with-
in the broadcasting network.
After the PTY programme the system will
remain in the radio mode.
Notice:
As mentioned earlier, these functions are
currently only supported by a limited number
of RDS stations.
HH/Melb/Miami gb®
15.05.2002, 13:46 Uhr
43
