Blaupunkt BT 10e, Инструкция по эксплуатации

Страница: 30 / 34

Paired successfully
will blink twice
in 5 to 6 seconds intervals
Blaupunkt
BT 10e Blaupunkt
BT 10e
Operation
ON OFF DC 5V MP3 LINK ON OFF DC 5V
1. Power on
Once turned on, after 3 seconds the system will search for previous paired devices for 20
seconds with its LED blinking slowly. After 20 seconds if no paired devices are found, it will
commence new pairing sequence automatically. It will start the pairing sequence for 3 minutes
before returning to the initial sequence of locating previously paired device.
Depress for 3 secs, pairing mode sequence will commence. If prompted for security code,
please key in “0000”.
Pairing with Bluetooth music devices. Once paired, Bluetooth LED will blink for 2 seconds once
about every 5 to 6 seconds interval. (skip this step if both Blaupunkt BT 10e and music device
had saved this profile before)
iPhone, iPad or iPod
go to SETTINGS > GENERAL > enable BLUETOOTH > select Blaupunkt BT 10e.
Android Phone
go to SETTINGS > WIRELESS & NETWORKS > enable BLUETOOTH > select Blaupunkt BT 10e
Others
read the instruction manual included with your BT music device > enable BLUETOOTH > select
Blaupunkt BT 10e.
2. Bluetooth Pairing ON (manually)
Blue LED blink rapidly
3. Bluetooth Pairing with BT audio device
BT 10e
30