Blaupunkt Brisbane SD48, Инструкции по эксплуатации и монтажу

Страница: 24 / 212

Sound
For every source (radio, SD, USB, CD
changer or AUX-IN), you can perform indi-
vidual and separate settings for the sound
(bass, middle and treble) and the equal-
izer.
The X-Bass and volume distribution settings
(balance and fader) apply to all the audio
sources.
Equalizer
This device features a digital 3-band equal-
izer. This equalizer allows for selecting one
frequency each for bass, treble and mid-
dle and to adjust the level for the selected
frequency. In addition, you can adjust the
quality factor for bass and middle.
Equalizer settings
The table below shows the bass, treble and
equaliser setting options in the "AUDIO"
menu.
AUDIO
BASS TREBLE ENHANCED
E-BASS E-MIDDLE E-TREBLE
Level
(GAIN)
-7 to +7 -7 to +7 – -7 to +7 -
Frequency
(FREQ)
– –
60 Hz, 80 Hz,
100 Hz or
200 Hz
0.5 kHz,
1.0 kHz,
1.5 kHz or
2.5 kHz
10 kHz,
12.5 kHz,
15 kHz or
17.5 kHz
Quality
factor
(QFAC)
– –
1.0, 1.25, 1.5
or 2.0
–
0.5, 0.75, 1.0
or 1.25
Basic settings Advanced settings
Some settings feature an "E" (for
"ENHANCED"), e.g. "E-BASS".
These settings are performed in the
"ENHANCED" submenu.
Note:
The table does not contain all the set-
tings that are possible in the menus
"AUDIO" and "ENHANCED".
Adjusting BASS
To adjust the level of the bass,
press the MENU button
>
.
The display shows "MENU".
Press the or button
2
repeatedly
until "AUDIO" appears on the display.
Press the button
2
to call up the
audio menu.
"BASS" appears on the display.
Press the button
2
to call up the
submenu.
W
W
W
W
24
Sound