Blaupunkt BP2914HD, Инструкция по эксплуатации

Страница: 11 / 35

- 10 -
Installation and Connection
1. Connect the TV RF antenna cable to the RF IN port on the back of the TV.
2. To connect your video sources (including DVD, VCR, PVR or Camcorder) you can connect them to the Video Input via an
RCA Cable (Red, White and Yellow cables).
3. For a better quality connection, the YPbPr Component Video Input can be connected with the YPbPr Video Output of your
DVD, VCR or Camcorder (cables not supplied).
4. For the best quality connection, the HDMI Input should be connected via the HDMI Output of your DVD, VCR or Camcorder
(cables not supplied). Please note that this connection is not available on most older devices.
5. AV Output allows you connect your TV with another monitor or TV sets when it is in DVD or TV mode.
6. VGA Input can be connected with the VGA Output of your PC to use this TV as a monitor. There is also a PC Audio Input
for your connection with PC, see image below.
7. Connect your TV to your Mains Power. Please only connect this TV to Mains Power that matches the power specifications
(AC 100-240 Volts, 50-60 Hz) of this TV.
Please note:

After AV, YPBPR or HDMI is selected from the Source List ensure the Video Output from your connected accessory
(for example DVD player) is set to the corresponding video mode.

AV and YPbPr share the same Right/Left Audio Input.
Basic Operations
1) Press the STANDBY Button on the unit or remote control to turn the TV on or off.
Please note: For the LCD models, you are required to press the main power switch on the back of unit before
pressing the Standby Button on your remote control.
2) If you are using the TV for the first time, the Installation Guide below will be displayed to guide you through the initial
channel scan. Press the Navigation Buttons to the prompted options i.e. language or Country. Then press the OK
Button to confirm. When you have selected the options in the Installation Guide, DTV Auto Tuning will then start
automatically. You may press the Menu Button to skip ATV for DTV tuning.